User guide

Chapter 10: Creating Aliases and Implementing Authentication
134 WatchGuard Firebox System
4 To add a new user, click the Add button beneath the Users list.
The Setup Firebox User dialog box appears, as shown in the following figure.
5 Enter the username and password.
6 To add the user to a group, select the group name in the Not Member
Of list. Click the left-pointing arrow to move the name to the Member
Of list.
7 When you finish adding the user to groups, click Add.
The user is added to the User list. The Setup Firebox User dialog box remains open
and cleared for entry of another user.
8 To close the Setup Firebox User dialog box, click Close.
The Firebox Users tab appears with a list of the newly configured users.
9 When you finish adding users and groups, click OK.
The users and groups can now be used to configure services and authentication.
Configuring Windows NT Server Authentication
Windows NT Server authentication is based on Windows NT Server
Users and Groups. It uses the Users and Groups database already in place
on your Windows NT network. Only end users are allowed to
authenticate; the default Windows NT groups Administrators and
Replicators will not authenticate using this feature. From Policy Manager:
1 Select Setup => Authentication Servers.
The Authentication Servers dialog box appears.