User guide

Chapter 8: Configuring Filtered Services
106 WatchGuard Firebox System
From the Properties dialog box:
1 Click the Incoming tab.
2 Click Logging.
The Logging and Notification dialog box appears, as shown in the following figure.
3 Enable the options you want, as described below.
The Logging and Notification dialog box contains the following controls:
Category
The list of event types that can be logged by the service or option.
This list changes depending on the service or option you’ve
selected. You click the event name to display and set its
properties.
Enter it in the log
When you enable this checkbox, an entry appears in the log file
each time someone on the external network uses the service
incorrectly. For example, if someone attempts to send a packet to
an address other than the host IP address you specified when
defining service properties, the packet is denied and an entry
made in the log file.
Send notification
When you enable this checkbox, a notification is sent every time
packets are denied. You set notification criteria using the
WatchGuard Security Event Processor (WSEP). For more
information, see “Customizing Logging and Notification by
Service or Option” on page 185.