User guide

Chapter 5: Administrative Options
56 WatchGuard Firebox SOHO 6
4 Type the location of the firmware files on your computer or
click Browse and locate the firmware files on your computer.
5 Click Update.
Follow the instructions provided by the update wizard.
NOTE
The update wizard requests a user name and password. Type the system
administrator name and passphrase configured on the System Security
page. The default values are “user” and “pass”.
Activating the SOHO 6 Upgrade Options
Every SOHO 6 includes the software for all upgrade options. To
activate an upgrade option, you must enter a license key in the
configuration of the SOHO 6. To receive a license key, purchase
and activate an upgrade option at the LiveSecurity Service Web
site. See “Registering Your SOHO 6 and Activating the
LiveSecurity Service” on page 27 for more information.
Follow these steps to activate an upgrade option:
1 Go to the upgrade page of the WatchGuard Web site:
http://www.watchguard.com/upgrade
2 Type your user name and password in the applicable fields.
3 Click Log In.
4 Follow the instructions provided on the Web site to activate
your license key.
5 Copy the feature key from the LiveSecurity Service Web site.
6 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1