User guide

User Guide 45
Configuring the OPT Port Upgrades
After you upgrade the SOHO 6 to activate this upgrade option,
follow these instructions to complete the configuration:
1 Connect one end of a straight-through Ethernet cable to the
optional port (OPT), and connect the other end to the source of
the secondary external network connection. This connection
can be a DSL modem, a cable modem, or a hub.
2 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
3 From the navigation bar at left, select
Network => Dual ISP.
The Dual ISP Options page opens.
4 Select the Enable Dual ISP check box.
5 Type the IP addresses for the external and optional interfaces
in the applicable fields.
6 Type the number of seconds between pings and the number of
seconds to wait for a reply in the applicable fields.
7 Type the limit number of pings before timeout in the applicable
field.