User guide

Chapter 10: MUVPN Clients
114 WatchGuard Firebox SOHO 6
3 Click the Protocols tab and then select the TCP/IP protocol.
4 Click Properties.
The Microsoft TCP/IP Properties window appears.
5 Click the DNS tab and then click Add.
6 Enter the IP address of your DNS server in the applicable field.
To add additional DNS servers, repeat steps 5 and 6.
NOTE
The DNS server on the private network behind the SOHO 6 must be the
first server in the list.
7 Click the WINS Address tab, type the IP address of your WINS
server in the applicable field, and then click OK.
To add additional WINS servers, repeat this step.
8 Click Close to close the Network window.
The Network Settings Change dialog box appears.
9 Click Yes to restart the computer.
The computer reboots.
Windows 2000 operating system setup
This section describes how to install and configure the network
components that are required for the Windows 2000 operating
system. These components must be installed before the MUVPN
client will function correctly on a Windows 2000 computer.
From the Windows desktop:
1 Select Start => Settings => Network and Dial-up Connections.
2 Select the dial-up connection you use to access the Internet.
The connection window appears.
3 Click Properties and the click the Networking tab.
4 Make sure the following components are installed and enabled:
- Internet Protocol (TCP/IP)