WatchGuard XTM 2-Series Hardware Guide XTM 21, 22, 23, 21-W, 22-W, 23-W
Copyright and Patent Information Copyright© 1998 - 2009 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard logo, Firebox, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies, Inc. and/or it’s subsidiaries in the United States and/or other countries. All other trademarks are the property of their respective owners.
Legal and Regulatory Information Limited Hardware Warranty This Limited Hardware Warranty (the “Warranty”) applies to the enclosed hardware product, not including any associated software, which is licensed pursuant to a separate end-user license agreement and warranty (the “Product”). BY USING THE PRODUCT, YOU (either an individual or a single entity) AGREE TO THE TERMS HEREOF.
Legal and Regulatory Information OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY, THE PRODUCT). 4. LIMITATION AND LIABILITY. WATCHGUARD'S LIABILITY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT.
Legal and Regulatory Information Declaration of Conformity DECLARATION OF CONFORMITY WatchGuard Technologies, Inc. 505 Fifth Ave. S., Suite 500 Seattle, WA 98104-3892 USA WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration.
Legal and Regulatory Information FCC Certification This device has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
Legal and Regulatory Information Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate with the antennas listed below, and having a maximum gain of 2.0 dBi. Antennas not included in this list or having a gain greater than 2.0 dBi are strictly prohibited for use with this device.
Legal and Regulatory Information Taiwanese Class A Notice Taiwanese Wireless Notice France En France, ce produit ne peut être installé et opéré qu'à l'intérieur, et seulement sur les canaux 10, 11, 12 , 13 comme défini par IEEE 802.11g/b. L'utilisation de ce produit à l'extérieur ou sur n'importe quel autre canal est illégal en France. In France, this product may only be installed and operated indoors, and only on channels 10, 11, 12, 13 as defined by IEEE 802.11g/b.
Legal and Regulatory Information WEEE Statement WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment (WEEE). The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the reduction of WEEE through reuse, recovery, and recycling of WEEE.
Legal and Regulatory Information Licensing Some components of the XTM 2-Series software are distributed with source code covered under one or more third party or open source licenses. You can find full licensing information in the Licensing Guide on our public web site at www.watchguard.com/help/documentation. We include below the full text of the GNU General Public License.
Legal and Regulatory Information For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
Legal and Regulatory Information conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole.
Legal and Regulatory Information 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
Legal and Regulatory Information WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 2.
Hardware Specifications The WatchGuard® XTM 2-Series security appliances deliver unparalleled unified threat management, superior performance, ease of use, and value for your small organization or branch office. Our security subscriptions give you fully integrated protection from spyware, spam, viruses, worms, trojans, web-based exploits, and blended threats. From firewall and VPN protection to secure remote access, WatchGuard XTM 2-Series offers support for a broad range of network environments.
Hardware Specifications Package Contents The package contains this Hardware Guide on a CD-ROM and: XTM 2-Series appliance Quick Start Guide Hardware warranty card AC adapter (12V/2A) with international plug kit Power cable clip, to attach to the cable and connect to the the device. This decreases the tension on the power cable. 4 rubber pads for the bottom of the device.
Hardware Specifications Environmental Requirements We recommend that you use these guidelines to install your XTM 2-Series devices safely: • • • Install it indoors. Put it in a secure area, such as a locked room, to block the device from people who do not have permission to use it Connect it to a conditioned power supply to prevent damage from sudden power changes Other environmental requirements for the XTM 2-Series units.
Hardware Specifications Hardware Description All indicator lights are on the front panel of the device, and all ports and connectors are on the rear panel. Front view The front panel of the device. Fail Over The Fail Over indicator is green when there is a WAN failover from the primary external interface to the backup interface. After the external interface connection fails back to the primary external interface the indicator is not lit.
Hardware Specifications Rear view Rear view of the device. Network interfaces The interfaces have standard RJ45 connectors and are labeled 0, 1, 2, 3, 4, 5, 6. Interfaces 0, 1, and 2 can operate at 10 or 100 Mpbs. Interfaces 3, 4, and 5 can operate at 10, 100, or 1000 Mbps. Antenna (wireless models only) The back of the XTM 2-Series Wireless has a wireless antenna. Power input A 12V/2A power supply is included with your device. Connect the AC adapter to the device and to a power source.
Hardware Specifications AC power adapter The AC power adapter supplies power for the XTM 2-Series device. You must use the correct plug for the AC power adapter for the power source used in your country. The international plug kit includes four plugs: Q-NA (North America), Q-UK (United Kingdom), Q-EU (European Union), and Q-SAA (Asia). Removing a plug from the AC power adapter If the plug installed in the AC power adapter does not match your power source: 1.
Hardware Specifications Restore Factory Default Settings If you have a problem in your configuration file that you cannot correct, you can restore the factory default settings and start from a new configuration file. For example, if you do not know the administrator account passphrase, or if a power interruption causes damage to the Fireware XTM OS, you can restore the XTM 2Series device to the factory default settings and build your configuration again.
Hardware Specifications About the XTM 2-Series Wireless The WatchGuard XTM 2-Series Wireless conforms to IEEE 802.11a/b/g/n wireless LAN standards. Some key features that have an effect on performance of an 802.11a/b/g/n wireless device include antenna directional gain, signal attenuation (path loss), and channel data rate. Antenna directional gain Antenna directional gain is based on the shape of the radiation pattern around the antenna. The XTM 2-Series Wireless uses three 2.
