User's Manual

224 WatchGuard Firebox X Edge
Rear view
Serial port (DB9)
Use the serial port to connect an external modem to the
Firebox X Edge.
Ethernet interfaces LAN0 through LAN2
The Ethernet interfaces with the marks LAN0 through LAN2 are
for the trusted network.
OPT interface
This Ethernet interface is for the optional network.
WAN interfaces 1 and 2
The WAN1 and WAN2 interfaces are for external networks.
NOTE
If you use a Firebox X Edge e-Series DSL model, WAN1 is your
interface to the DSL connection.
Power input
A 12V/1.2A power supply is included with your Firebox X Edge.
Connect the AC adapter to the Firebox X Edge and to a power
source. The power supply tip is plus (+) polarity.
NOTE
If you use a Firebox X Edge e-Series DSL model, you must use the
12V/2.0A AC adapter that comes with the Firebox X Edge e-Series
DSL.
RESET button
To reset the Firebox X Edge, use the procedure in “Factory
Default Settings” on page 43.