User's Manual

Hardware Description
User Guide 223
Fail/Over
The Fail/Over indicator shows a WAN failover. The light is green
when there is a WAN failover from WAN1 to WAN2. The light
goes off when the external interface connection goes back to
WAN1.
Link
The link indicator shows a physical connection to a trusted
Ethernet interface. The trusted interfaces have the numbers 0
through 6. The light comes on when traffic goes through the
related interface.
100
When a trusted network interface operates at 100 Mbps, the
related 100 indicator light comes on. When it operates at 10
Mbps, the indicator light does not come on.
Status
The status indicator shows a management connection to the
Firebox X Edge. The light goes on when you use your browser to
connect to the Firebox X Edge configuration pages. The light
goes off a short time after you close your browser.
Mode
The mode indicator shows the status of the external network
connection. The light comes on when the Ethernet cable is
correctly connected to the WAN1 interface. The light is green if
the Firebox X Edge can connect to the external network and
send traffic. The light flashes if the Firebox X Edge cannot
connect to the external network and send traffic.
Attn
The Attn indicator is reserved for future use.
Power
The power indicator shows that the Firebox X Edge is on.