Manualshelf

- WatchGuard Firebox System User Guide

ManualsBrandsWatchGuard Technologies ManualsNetwork RouterFireboxTM System 4.6
81828384858687888990
Enabling the Management Station
80
Preparing a Windows NT Management Station for OOB
Install the Microsoft Remote Access Server (RAS) on the Management Station. From
the Windows NT Desktop:
1 Attach a modem to your computer according to the manufacturer’s instructions.
2 Select Start => Settings => Control Panel.
3Double-click Network.
4Click Add.
The Select Network Service dialog box appears.
5Click Remote Access Server. Click OK.
Follow the rest of the prompts to complete the installation. If Dial-Up Networking is not already
installed, you will be prompted to install it.
Preparing a Windows 95/98 Management Station for OOB
From the Windows 95/98 desktop:
1Double-click My Computer. Double-click Dial-Up Networking. Double-click
Make New Connection.
2 Enter the name of the connection, select a device, and select your modem. Click
Next.
3 Enter the area code and phone number of the Firebox (the phone number of the
analog line connected to the Firebox’s modem). Click Finish.
If Dial-Up Networking is not already installed, you will be prompted to install it.
Preparing a Windows 2000 Management Station for OOB
Before configuring the Management Station, you must first install the modem. If the
modem is already installed, go to the instructions for configuring Windows 2000 to
work with OOB.
Install the modem
1 From the Desktop, click Start => Control Panel => Modem and Phone Options.
2Click the Modem tab.
3Click Add. The Add/Remove Hardware wizard appears.
4 Follow the wizard through, completing the information requested.
You will need to know the name and model of the Firebox modem and the modem speed.
5Click Finish to complete the modem installation.
Configure the dial-up connection
1 From the Desktop, click My Network Places => Properties => Make New
Connection.
The Network Connection wizard appears.
2Click Next. Select Dial up to Private Network. Click Next.
3 Enter the telephone number of the line connected to the modem in the Firebox.
Click Next.
4 Choose the proper designation for your connection. Click Next.