User Manual

6
7. Activate Token
Note: The commercial device can be activated only once when user gets the device firstly, but for
test purpose, you can test activation repeatedly.
1. Open WatchQRO by long press “C”, enter PIN
2. Enter “Settings”->”Deactive” by press orientation and OK button
3. Restart token, token will have the non-activated status
4. Open url:http://219.235.193.140:8082/WatchQRODemo_Entrust_en/demo, login without
OTP verify, then enter Figure 6.1
Figure 6.1
5. Click “Security Center”-> “Activate Token” in Figure 6.1, then as figure 6.2.
Figure 6.2
6. Open WatchQRO by long press “C”, as Figure 6.3
7. Take a shot at the QR code with the WatchQRO.
8. WatchQRO is activated successfully. The default pin of WatchQRO is “000000”.