User Manual

6
2. Enter “Settings”->”Deactive” by press orientation and OK button
3. Restart token, token will have the non-activated status
4. Open url:http://219.235.193.140:8082/WatchQRODemo_Entrust_en/demo, login without
OTP verify, then enter Figure 6.1
Figure 6.1
5. Click “Security Center”-> “Activate Token” in Figure 6.1, then as figure 6.2.
Figure 6.2
6. Open WatchQRO by long press “C”, as Figure 6.3
7. Take a shot at the QR code with the WatchQRO.
8. WatchQRO is activated successfully. The default pin of WatchQRO is “000000”.
7.0. FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: