Specifications

WatchDog™Settings
The WatchDog™ Settings page is where you can control  the various
alerts.
Clickonthebuttonmarked“WatchDog™Settings”locatedontheleft
handsideofthewebpageintheStatusBar.
BeginbyselectingtheTimeZonethatyourvesselwillbeoperatingin.
Next,enterthetimeyouwouldlikeyourdailyreportemailedtoyou.
BatteryLevelAlerts
TherearetwoalertsavailabletoyouintheVMSsystem.ThereisaMAIN
BATTERYALERTanda BACKUP BATTERYALERT. In bothcases an
alertwillbesentviaemailorcellphone,asrequestedinthesetuppage
(seeNotifications,below),ifthevoltagelevelineitherbatteryisat11.6volts
orlowerformorethan10continuousminutes.
MakesuretheACTIVATESENSORischeckednexttotheMainBattery
sensorbox.
If you have a Backup Battery connected to the system, make sure the
ACTIVATESENSORischeckednexttotheBackupBatterysensorbox.
page15