Product data
UJA1167 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 2 — 18 April 2014 40 of 60
NXP Semiconductors
UJA1167
Mini high-speed CAN system basis chip with Standby/Sleep modes &
watchdog
7. Limiting values
[1] When the device is not powered up, I
V1
(max) = 25 mA.
[2] Verified by an external test house to ensure pins can withstand ISO 7637 part 2 automotive transient test pulses 1, 2a, 3a and 3b.
[3] ESD performance according to IEC 61000-4-2 (150 pF, 330 ) has been verified by an external test house; the result was equal to or
better than 6 kV.
[4] Human Body Model (HBM): according to AEC-Q100-002 (100 pF, 1.5 k).
[5] V1 and BAT connected to GND, emulating the application circuit.
[6] Machine Model (MM): according to AEC-Q100-003 (200 pF, 0.75 H, 10 ).
[7] Charged Device Model (CDM): according to AEC-Q100-011 (field Induced charge; 4 pF).
[8] In accordance with IEC 60747-1. An alternative definition of virtual junction temperature is: T
vj
=T
amb
+P R
th(j-a)
, where R
th(j-a)
is a
fixed value used in the calculation of T
vj
. The rating for T
vj
limits the allowable combinations of power dissipation (P) and ambient
temperature (T
amb
).
Table 44. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
V
x
voltage on pin x DC value
pin V1
[1]
0.2 +6 V
pins TXD, RXD, SDI, SDO, SCK, SCSN, RSTN 0.2 V
V1
+0.2 V
pins INH/VEXT/WAKE 18 +40 V
pin BAT 0.2 +40 V
pins CANH and CANL with respect to any other pin 58 +58 V
V
(CANH-CANL)
voltage between pin
CANH and pin CANL
40 +40 V
V
trt
transient voltage on pins
CANL, CANH, WAKE, VEXT;
pin BAT via reverse polarity diode and capacitor to
ground
[2]
150 +100 V
V
ESD
electrostatic
discharge voltage
IEC 61000-4-2
[3]
on pins CANH and CANL; pin BAT with capacitor;
pin WAKE with 10 nF capacitor and 10 k resistor;
pin VEXT with 2.2 F capacitor
6+6 kV
HBM
[4]
on pins CANH, CANL
[5]
8+8 kV
on pins BAT, WAKE, VEXT 4+4 kV
on any other pin 2+2 kV
MM
[6]
on any pin 100 +100 V
CDM
[7]
on corner pins 750 +750 V
on any other pin 500 +500 V
T
vj
virtual junction
temperature
[8]
40 +150 C
T
stg
storage temperature 55 +150 C