Product data

UJA1167 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 2 — 18 April 2014 2 of 60
NXP Semiconductors
UJA1167
Mini high-speed CAN system basis chip with Standby/Sleep modes &
watchdog
 Battery and CAN bus pins protected against automotive transients according to
ISO 7637-3
 Very low quiescent current in Standby and Sleep modes with full wake-up capability
 Leadless HVSON14 package (3.0 mm  4.5 mm) with improved Automated Optical
Inspection (AOI) capability and low thermal resistance
 Dark green product (halogen free and Restriction of Hazardous Substances (RoHS)
compliant)
2.3 Low-drop voltage regulator for 5 V microcontroller supply (V1)
 5 V nominal output; 2 % accuracy
 100 mA output current capability
 Current limiting above 150 mA
 On-resistance of 5  (max)
 Support for microcontroller RAM retention down to a battery voltage of 2 V
 Undervoltage reset with selectable detection thresholds: 60 %, 70 %, 80 % or 90 % of
output voltage
 Excellent transient response with a 4.7 F ceramic output capacitor
 Short-circuit to GND/overload protection on pin V1
 Turned off in Sleep mode
2.4 Power Management
 Standby mode featuring very low supply current; voltage V1 remains active to maintain
the supply to the microcontroller
 Sleep mode featuring very low supply current with voltage V1 switched off
 Remote wake-up capability via standard CAN wake-up pattern
 Local wake-up via the WAKE pin
 Wake-up source recognition
 Local and/or remote wake-up can be disabled to reduce current consumption
 High-voltage output (INH) for controlling an external voltage (UJA1167TK)
2.5 System control and diagnostic features
 Mode control via the Serial Peripheral Interface (SPI)
 Overtemperature warning and shutdown
 Watchdog with independent clock source
 Watchdog can be operated in Window, Timeout and Autonomous modes
 Optional cyclic wake-up in watchdog Timeout mode
 Watchdog automatically re-enabled when wake-up event captured
 Watchdog period selectable between 8 ms and 4 s
 Supports remote flash programming via the CAN bus
 16-, 24- and 32-bit SPI for configuration, control and diagnosis
 Bidirectional reset pin with variable power-on reset length to support a variety of
microcontrollers
 Configuration of selected functions via non-volatile memory