User Manual
Table Of Contents
- 1 Features
- 2 Safety Symbols used in this Manual
- 3 Safety Guidelines
- 4 Responsibility for Operation or Damage
- 5 Application
- 6 Before Starting
- 7 Installation/ Start-up
- 8 Operation
- 9 Troubleshooting
- 10 Care and Maintenance
- 11 Technical Data
- 12 Disposing of the Unit
- 13 EU Declaration of Conformity
2
8 Operation
8.1 General Operating Instructions
All instructions for using the unit, whether in verbal or written form, are based on our own
experience and experimentation and can only be regarded as guidelines.
8.2 Handling of the Unit
The WP-3000 Ex II is turned on with the main switch. The motor speed is controlled using
the arrow keys. The extraction and the LED spot can be manually turned on and off.
Main Switch: The device is powered. The lighting is on.
Emergency off: Once applied, the motor is de-energized.
The motor starts again by pressing the
button „motor start / stop“ .
Toggle switch: LED Spot on / off
9
3
1
2
3
1
3
2
6