User Manual

6 Before Starting

6.1 Transport

Before transporting the unit, ensure that it has been unplugged from the power socket.

Make sure that it is packed correctly in order to avoid accidental damage.

Be sure to check for any transport damage when unpacking the goods. Note down

any damage if found.

6.2 Installation

Open the box, remove the packing materials, and carefully lift out the device and

accessories. Check the included accessories.

For transport ex works the polishing motor is supported by a stable paperboard

block. Please remove this transit support before using the unit. After removing the

cardboard box also the integrated drawer can be opened easily.

The device has to stand horizontally on a steady and even surface. Install the

device in a place where it will not block the working area and the functionality

(take the dimensions into account). Make sure that there are about 10 cm of free

space on each side to guarantee air circulation (heat dissipation).

Do not install the unit outdoors or in places without proper ventilation.

Before start-up, be sure the device reaches room temperature.