User Manual
Table Of Contents
- 1 Features
- 2 Safety Symbols used in this Manual
- 3 Safety Guidelines
- 4 Responsibility for Operation or Damage
- 5 Application
- 6 Before Starting
- 7 Installation/ Start-up
- 8 Operation
- 9 Troubleshooting
- 10 Care and Maintenance
- 11 Technical Data
- 12 Disposing of the Unit
- 13 EU Declaration of Conformity
2 Safety Symbols used in this Manual
Warning!
This is a warning of risk situations and dangers.
Failure to observe this warning could be life-threatening. These warnings has to
be observed.
Information!
This symbol draws your attention to specific features that has to be observed.
3 Safety Guidelines
Configuring and operating this equipment requires precise knowledge and observance
of the instructions in this user manual. The equipment is designed only for its intended
application.
WARNING:
Servicing and repairs should be carried out only by authorised specialists.
Disconnect the power plug before starting any maintenance work.
115 V version
Make sure that the equipment is connected to the correct power source.
• The retaining brackets (white) have to be above the filter frame so that the
filter bag is fixed in place, and the cover must be closed.
• The main switch also functions as safety switch. If the power supply is
interrupted, the switch returns to the neutral position in order to prevent an
uncontrolled operation of the motor when the power supply is restored.
• The fuse of the WP-Ex 3000 II is located next to the socket of the supply
line plug.
5