User Manual
Table Of Contents
- 1 Features
- 2 Safety Symbols used in this Manual
- 3 Safety Guidelines
- 4 Responsibility for Operation or Damage
- 5 Application
- 6 Before Starting
- 7 Installation/ Start-up
- 8 Operation
- 9 Troubleshooting
- 10 Care and Maintenance
- 11 Technical Data
- 12 Disposing of the Unit
- 13 EU Declaration of Conformity
10.2 Maintenance
The unit does not require any servicing. Just make sure that the device is kept clean and a
matched filter change should take place according to the needs.
The unit is equipped with 2 extra large micro fine dust filterbag.
If the suction power decreases, please change the filter!
10.2.1 Filter and Changing the Filter
Open the two clamps on the rear panel. Then the cover can be slided back and be
removed. Turn the retaining brackets (white) above the filterframe sidewards, so that the
filterbag can be changed. Insert new filterbag, making sure that the filterbag is smoothly
inserted into the unit. Afterwards the retaining brackets (white) have to be turned back
above the filter frame so that the filterbag is fixed in place. Replace the cover, slide forward
and secure with two clamps. Do the same with the second cover and the second filter.
(Backview) (Frontview) (Frontview)
Loose the clamps
Lift the lid in the back slightly and push it backwards
Remove the cover and change the filter.
13
3
1
2
3
1
2
3