User Manual
Table Of Contents
- 1 Features
- 2 Safety Symbols used in this Manual
- 3 Safety Guidelines
- 4 Responsibility for Operation or Damage
- 5 Application
- 6 Before Starting
- 7 Installation/ Start-up
- 8 Operation
- 9 Troubleshooting
- 10 Care and Maintenance
- 11 Technical Data
- 12 Disposing of the Unit
- 13 EU Declaration of Conformity
8.2 Handling of the Unit
Main / Protection switch: The device is powered. The lighting is on.
Emergency off: After pushing the emergency off [2] and
a check of all facts, the unit can be restarted
by switching on the main switch [1].
* Reset is effected in two steps:
Switch rocker [1] into OFF position.
Reset circuit breaker. Main switch [1] into ON position.
Rocker switch: On / Off switch suction
Toggle switch: Position I = Speed 1500 min
-1
Position 0 = Motor turn off
Position II = Speed 3000 min
-1
1
3
2
1
2
3
4
4