User Manual

7.3 When using 6 kg Bulks:
Remove the closings from the cans filled with two component silicone and screw the
adaptor set onto the cans.
Warning: Screw the colour marked adapter onto the can filled with coloured
silicone compound – component B. Do not mix up! If you mix up the closings
even for a short time, the device must be disassembled and cleaned.
Insert the can with quick closings into the entry on the back of the device (the can
will be upside down).
Very important: Drill a ventilation hole using a drill or similar tool at the upper side edge of
the can to ensure proper ventilation.
7.4 When using 25 kg Bulks:
Note that while using bulk containers, the cans must be positioned at a height higher
than the device. Optional pad stands are available on request.
Remove the closings from the cans filled with two component silicone and screw
connection hoses onto the cans.
Warning: Screw the colour marked connection hose onto the can filled with
coloured silicone compound – Component B - screw on. Do not mix up! If you
mix up the closings even for a short time, the device must be disassembled and
cleaned.
Place the can, e.g. on the optional pad stand, to make sure that it will be placed
higher than the dosage device (can will be upside down) and insert the connection
hoses with quick closings into the entry on the back of the device.
Very important: Drill a ventilation hole using a drill or similar tool at the upper side edge of
the can to ensure proper ventilation.
10