User manual

72
WPL 612 User Manual
Initialization
SELECT YES
MENU NO
Initializing …
3.5 Service
Service
Initialization Mileage Info. Exit
This feature is used to restore printer settings to defaults and display printer mileage
information.
3.5.1 Initialization
Service 1/3
>
Initialization
Mileage Info.
Exit
The printer settings are restored to defaults as below once printer is initialized.
Note : When printer initialization is done, please calibrate the gap or black mark
sensor before printing.
Parameter
Default setting
Speed
6 IPS (152 mm/sec)
4 IPS (101.6 mm/sec)
3 IPS (76.2 mm/sec)
Density
8
Label width
4.00”(101.6mm)
Label height
4.00”(101.6mm)
Sensor type
Gap sensor
Gap setting
0.12”(3.0mm)
Print direction
0
Reference point
0,0(upper left corner)
Offset
0
Print mode Batch mode
Serial port settings
9600 bps, none parity, 8 data bits, 1 stop bit
Code page
850
Country code
001
Clear flash memory No
Shift X
0
Shift Y
0