User manual

61
WPL 612 User Manual
Stop Bit(s) 1/3
>
1
2
Exit
3.1.3.4 Stop Bit(s):
Serial Comm. 4/5
Parity
Data Bits
>
Stop Bit(s)
This option is used to set the RS-232 Stop Bits. The default setting is “1” stop bit.
Press and buttons to select the different Stop Bits and press
button to set the value into printer. W hen you enter this list, the option in
the right side of “>” icon is the printer current setting. Press key to
cancel the setting and return to the previous menu.