User manual

53
WPL 612 User Manual
Gap Size
0024 dot
Gap Mode
Scan Backing
Intensity x
Ref. Level xxx
Gap Mode
Scan Paper
Intensity x
Ref. Level xxx
Gap Mode
Complete
Intensity x
Ref. Level xxx
2. Press the button to move
the cursor from left digit to right digit,
and press the button to set
the
value from “0” to “9” and the “dot/
mm/ inch”. Press the
button to set the gap size into the
printer.
3. Open the print head mechanism, put
the label backing (liner) under the
media sensor. Press the
button to set the value into the printer.
Media sensor
Label backing
(liner)
4. Then, Put the label with liner under the
media sensor. Press the
button to set the value into the printer.
Media sensor
Label with liner
5. The gap sensor calibration is
complete. Press the
button the LCD screen will return to
the previous menu.
A-3 Pre-Printed
This function can set the paper length and gap size before auto-calibrate the
sensor sensitivity. It can to get the sensor sensitivity accurately.
Gap Mode 3/4
Manual
>
Pre-Printed
Exit