User manual

49
WPL 612 User Manual
Delimiter Char
<
,
> 2CH
Media Power U 4/5
Length
>
No Motion
Exit
Head Close 4/5
Length
>
No Motion
Exit
3.1.1-2.12 Delimiter Char:
Print Setup 12/17
Control Prefix
Format Prefix
>
Delimiter Char
This option is used to set delimiter character. Press the button to move
the cursor from left digit to right digit, and press the button to set the value
from “0” to “9” or “A” to “F”. Press the button to set the value into printer.
Press key to cancel the setting and return to the previous menu.
3.1.1-2.13 Media Power Up:
Print Setup 13/17
Format Prefix
Delimiter Char
>
Media Power Up
This option is used to set the action of the media when you turn on the printer.
Printer default setting is No Motion. W hen enter this list, the print mode in the right
side of “ >” icon is the printer current setting. Press and to select
the different print mode and press button to enable the setting. Press
key to cancel the setting and return to the previous menu.
Selections Description
Feed Printer will advance one label
Calibration
Printer will calibration the sensor levels, determine length
and feed label
Length Printer determine length and feed label
No Motion Printer will not move media
3.1.1-2.14 Head Close:
Print Setup 14/17
Delimiter Char
Media Power Up
>
Head Close