User`s manual

3.2 Loading Label Stock

1. Insert a 1” label spindle into a paper roll (If your paper core is 1 inch, remove the 1.5 inch

core adapter from the fixing tab).

2. Open the printer’s top cover by releasing the yellow top cover open levers located on

both sides of the printer and lifting the top cover.

3. Place a roll of paper into internal paper roll mount.

4. Feed the paper, printing side face up, through the label guides and place the label over

the platen.

5. Adjust the black center-biased label guides in or out by turning adjustment knob so they

are slightly touch the edges of the label backing.

Label Roll

1” Label Spindle

Label Roll Mount

Platen

1.5” Core Adapte

Adjustment Knob

Fixing Tab

Label Guide

Printing Side Face up