User`s manual

DIRECTION 0 DIRECTION 1

Note: If printing from enclosed software/driver, the software/driver will send out the

command, which will overwrite the setting selection made on the front panel.

3.1.1.4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)

This option is used to set the print mode. Printer default setting is Batch Mode. When enter this list,

the print mode in the right side of " >" icon is the printer current setting. Press

and

to select the different print mode and press the button to enable the setting.

Press the

key to cancel the setting and return to the previous menu.

Printer Mode Description

None

Next label top of form is aligned to the print head burn line location.

(Tear Off Mode)

Batch Mode

Once image is printed completely, label gap/black mark will be fed to

the tear plate location for tear away.

Peeler Mode Enable the label peel off mode.

Cutter Mode Enable the label cutter mode.

Cutter Batch Cut the label once at the end of the printing job.

Note: If printing from enclosed software/driver, the software/driver will send out the

Print Setup 4/12

Density

Direction

> Print Mode

Print Mode 2/6

> Batch Mode

Peeler Mode

Cutter Mode