User manual

48
WPL 406 User Manual
Cont. Mode 1/3
>
Automatic
Manual
Exit
Cont. Mode
Remove Label
Intensity x
Ref. Level xxx
Cont. Mode
Scan Paper
Intensity x
Ref. Level xxx
C. Cont. Mode
Calibration 3/4
Bline Mode
>
Cont. Mode
Exit
Press the and buttons to scroll the cursor to the sensor type. Press the
button to enter the black-mark sensor calibration mode.
C-1 Automatic
When enter the [Automatic] option, you will see following message and printer will
calibrate the sensor sensitivity automatically. When calibration process is completed,
the LCD screen will return to the previous menu.
Cont. Mode
Automatic
C-2 Manual
In case “Autom atic” sensor calibration cannot apply to the media, please use
“Manual” function to calibrate the sensor manually.
Cont. Mode 2/3
Automatic
>
Manual
Exit
When enter [Manual] option, you will see following message. Please complete there
steps：
1. Remove the continuous label. Press
the button to set the value
into the printer.
2. Then, put the continuous label under
the media sensor. Press the
button to set the value into
the
printer.