User manual

44
WPL 406 User Manual
Paper Len.
00812 dot
Gap Siz
0024 dot
Gap Mode
Pre-Printed
Gap Mode 3/4
Manual
>
Pre-Printed
Exit
When enter [Pre-Printed] option, you will see following message. Please complete
there steps：
1. Press the button to move
the cursor from left digit to right digit,
and press the
button to set
the value from “0” to “9” and the “dot/
mm/
inch”. Press the
button to set the paper length into the
printer.
2. Press the button to move
the cursor from left digit to right digit,
and press the
button to set
the
value from “0” to “9” and the “dot/
mm/ inch”. Press the
button to set the gap size into the
printer.
3. Then, printer will feed labels to
calibrate the sensor sensitivity
automatically. W hen calibration is
completed, the LCD screen will return
to the previous menu.