User manual

40
WPL 406 User Manual
Label Top
+000
Left Position
+0000
the setting and return to the previous menu.
Selections Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels, determine length and
feed label
Length Printer determine length and feed label
No Motion Printer will not move media
3.1.1-2.15 Label Top:
Print Setup 15/17
Media Power Up
Head Close
>
Label Top
This option is used to adjust print position vertically on the label. Press the
button to move the cursor from left digit to right digit, and press the
button to
set the value from “+” to “-” or “0” to “1/2”. Press the
button to set the
value into printer. Press
key to cancel the setting and return to the
previous menu. The default value is +000 and range is -120 to +120 dots.
3.1.1-2.16 Left Position:
Print Setup 16/17
Head Close
Label Top
>
Left Position
This option is used to adjust print position horizontally on the label. Press the
button to move the cursor from left digit to right digit, and press the
button to set the value from “+” to “-” or “0” to “9”. Press the
button to set
the value into printer. Press
key to cancel the setting and return to the
previous menu. The default value is +0000 and range is -9999 to +9999 dots.