User manual

39
WPL 406 User Manual
Delimiter Char
<
,
> 2CH
Media Power U 4/5
Length
>
No Motion
Exit
Head Close 4/5
Length
>
No Motion
Exit
3.1.1-2.12 Delimiter Char:
Print Setup 12/17
Control Prefix
Format Prefix
>
Delimiter Char
This option is used to set delimiter character. Press the button to move the
cursor from left digit to right digit, and press the
button to set the value from “0”
to “9” or “A” to “F”. Press the
button to set the value into printer. Press
key to cancel the setting and return to the previous menu.
3.1.1-2.13 Media Power Up:
Print Setup 13/17
Format Prefix
Delimiter Char
>
Media Power Up
This option is used to set the action of the media when you turn on the printer. Printer
default setting is No Motion. When enter this list, the print mode in the right side of “ >”
icon is the printer current setting. Press
and to select the different print
mode and press
button to enable the setting. Press key to cancel
the
setting and return to the previous menu.
Selections Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels, determine length and
feed label
Length Printer determine length and feed label
No Motion Printer will not move media
3.1.1-2.14 Head Close:
Print Setup 14/17
Delimiter Char
Media Power Up
>
Head Close
This option is used to set the action of the media when you close the printhead. Printer
default setting is No Motion. When enter this list, the print mode in the right side of “ >”
icon is the printer current setting. Press
and to select the different print
mode and press
button to enable the setting. Press key to cancel