User manual

36
WPL 406 User Manual
Print Mode 1/4
>
Tear Off
Peel Off
Cutter
Print Width
812 dot
“-” or “0” to “9”. Press the button to set the value into printer. Press
key to cancel the setting and return to the previous menu. The default value is +000.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.1-2.4 Print Mode: (Tear Off / Peel Off / Cutter)
Print Setup 4/17
Print Speed
Tear Off
>
Print Mode
This option is used to set the print mode. Printer default setting is Tear Off. When enter this
list, the print mode in the right side of “ >” icon is the printer current setting. Press
and
to select the different print mode and press button to enable the
setting. Press
key to cancel the setting and return to the previous menu.
Printer Mode Description
Tear Off
Next label top of form is aligned to the print head burn line
location.
Peel Off Enable the label peel off mode.
Cutter Enable the label cutter mode.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.1-2.5 Print Width:
Print Setup 5/17
Tear Off
Print Mode
>
Print Width
This option is used to set print width. Press the button to move the cursor from
left digit to right digit, and press the
button to set the value from “0” to “9” or “dot” to
“mm”. Press the
button to set the value into printer. Press key to
cancel the setting and return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.