User manual

31
WPL 406 User Manual
Reference Y
000
Code Page 11/41
>
850
852
860
7-bit 8-bit
International
Character Set
International
Character Set
code page name
code page number
USA USA 437 United States
BRI
British
850 Multilingual
GER German 852 Slavic
FRE French 860 Portuguese
DAN
Danish
863 Canadian/French
ITA Italian 865 Nordic
SPA Spanish
3.1.1-1.7 Reference X & Reference Y:
Print Setup 9/12
Shift Y
Reference X
>
Reference Y
This option is used to set the origin of printer coordinate system horizontally and vertically.
Press the
button to move the cursor from left digit to right digit, and press the
button to set the value from “0” to “9”. Press the button to set the value
into printer. Press
key to cancel the setting and return to the previous menu.
The default value is 000.
Note: If printing from enclosed software/driver, the software/driver will send out the
REFERENCE command, which will overwrite the setting set from the front
panel.
3.1.1-1.8 Code Page:
Print Setup 10/12
Reference X
Reference Y
>
Code Page
Use this option to set the code page of international character set. For more information
about code page, please to refer the programming manual.
When enter the code page list, the code page in the right side of “>” icon is the printer
current setting.
Press the
and to select the code page, and press the button
to enable the setting. Press
key to cancel the setting and return to the previous
menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.