User Manual

4
Your Wasp CCD LR Scanner is ready for use. The default settings of the Wasp
CCD LR Scanner have been pre-programmed for the most common bar code
configurations. Use the “CCD LR Setup & Configuration” sections only to
customize the Wasp CCD LR settings. Please review the “Enable Bar Code
Symbologies” configuration beginning on page 14 to see the list of bar code
symbologies which are enabled by default.
Tip:
• Use the pre-printed "Bar Code Test Symbols" in Appendix A on pages
28-30 as a test chart to practice scanning.
Chapter 4
Quick Start
DIN 5 TO DIN 6
CONVERTER CABLES