User Manual

Chapter 5

Beep and Delay

The 'Beep and Delay' configuration supports the general control options for the

Wasp CCD LR.These options include the volume, intercharacter delay, and

interblock delay.

Interblock delay is the minimum time interval between two adjacent scans. If the

processing speed of your host device is slower than your scanning speed, a

longer interblock delay may ensure the data integrity.

Intercharacter delay is the time period that the scanner will wait before

transmitting the next character. If data sent by the scanner has incorrect or

missing characters, a longer intercharacter delay may solve the problem.The

intercharacter delay should be changed only if the transfer rate cannot be

maintained between the Wasp CCD LR and the keyboard bu f fer of the computer.

Note: The default for the intercharacter delay is set to '140us' and is the most

common configuration; however, your PC may be different.When you scan a bar

code, if some stray or scrambled characters appear, increase the intercharacter

delay to slow down the transfer rate.

Beep Off

Beep Medium *

Beep High to Low

Beep Hi

Beep Low to High

Beep Low

Beep Settings

*Default