Specifications

8 UL - Operator Manual 141124
User Programming
User Settings Default Selection
Power Save ON ON/OFF
Detergent Injection Time 12 5 - 30 secs
Display Contrast 27 10 - 40
The User Settings menu is accessed for programming by pressing the UP and DOWN
keys simultaneously for a few seconds.
The programming options are specified in the table below:
Power Save function reduces the rinse temperature setting by 10°C when the machine is idle
for 5 minutes or more. The temperature settings return to the set value when door is opened or
START/STOP key is pressed.
Troubleshooting
If an error message appears on the control display first try turning the machine OFF for 30
seconds and then back ON. If the error message remains then call for service with the exception
of the following:
Display Code Cause Remedy
7. Fill Failure - wash tank
not full after fill timeout
Check flow rate of water supply Check water supply
8. Drain Failure Drain hose jammed/blocked Check/unblock drain
hose