Operating instructions

SoftCare Evo - Type SE10 4-7
Checking the safety ring
switch
Chapter 4 – Commissioning/dismantling/ conversion/
transport/assembly
)
Press frontal against the u-profile located
above the guidance rail.
⇒ The display in the operating unit shows
„Emergency stop actuated internally“.
⇒ The message remains in the display after
releasing the u-profile.
)
Acknowledge the message.
)
Repeat the above steps for the second u-
profile.
)
Press frontal against the lateral splash guard.
⇒ The display in the operating unit shows
„Emergency stop actuated internally“.
⇒ The message remains in the display after
releasing the splash guard.
)
Acknowledge the message.
)
Repeat the above steps for the splash guard
on the other side.
)
Press the safety ring switch upwards.
⇒ The display in the operating unit shows
„Safety ring“.
⇒ The message remains in the display after
releasing the ring switch.
)
Acknowledge the message.
