Operating instructions

SoftCare Evo - Type SE10 4-3
Cleaning agents
Chapter 4 – Commissioning/dismantling/ conversion/
transport/assembly
)
Check the levels in the chemical storage con-
tainers.
)
If necessary, fill up the containers with clean-
ing agent, pre-diluted as recommended by the
supplier of the cleaning agents. If a chemical
storage container has been emptied com-
pletely, all air must be bled out of the supply
lead (see Chapter 6 "Operation and settings").
There is a risk of injury when the system is
switched on. The system may be moved when a
wash program is started.
Secure the system with appropriate measure-
ments, e.g. warning signs, cordon, pylons, etc. to
avoid that a wash is started.
Highly inflammable and toxic cleaning agents
may cause damage to machinery and injury to
persons.
Such cleaning agents may not be used because
of the risk for fire hazard and health.