Operating instructions

SoftCare Evo - Type SE10 3-6
Safety ring switch
Chapter 3 - Structure and function
There is a safety ring switch (1) located at the centre
of the nozzle.
As soon as the safety ring switch touches a vehicle
during the drying stage, the gantry is stopped and
the roof nozzle makes a correcting movement (up-
wards). If the safety ring switch is thereby not re-
leased the system is switched off. The display on the
operating terminal shows an error message.
As soon as safety ring switch touches a vehicle dur-
ing the wash stage which is too high, the system is
switched off. The display on the operating terminal
shows an error message.
1 = Safety ring switch
Fig. 3-6: Roof nozzle with safety ring switch
Faulty safety ring switches can cause damage to
vehicles.
)
Check the safety ring switches every day
before starting up (see Chapter 4, "Com-
missioning")
Obstacles on the vehicle (taxi signs, ski-holders,
etc.) may not, in some circumstances, be de-
tected, and can be damaged.
)
Override obstacles manually
(see chapter 9, "Operating units")
!