Operating instructions

50
Trouble-shooting
84
1778
If there is leaking around glass:
A Re-cement glass in door gasket, if worn.
B Replace door gasket if worn.
If water does not enter machine:
A Check the coils on inlet valves.
B Check wires leading to coils.
C Be sure manual shut-off valves are in open
position.
D Check contacts on programmer.
E Check water level switch and plastic tubing.
F Check programmer switches K, N, O and Q.
If water continues to fill without stopping and
programmer DOES NOT advance.
A Check water level control.
B Check that air trap chamber is not plugged and
that plastic tube has no air leaks.
Fig.
84
Fig.
85
Fig.
86
86
1780
85
1779