Operating instructions

25
Card programming
44
1747
Rinse cycle 4
Rinse cycle 4 lasts for 8 minutes and begins with
Filling water to high water level and dispensing of
fabric conditioner from compartment 3 (peg no. 33
in ribs N, I and O removed).
The programmer stops the card at peg 33 until the
water level has been reached. The running time
once the water level has been reached is 2
minutes (peg nos. 33 to 36 in tibs N and O cut
away).
Rinse cycle 4 is concluded with Drain for 6
minutes (peg nos. 37-50 in rib K cut away). When
Drain has been in operation for 1 minute, the
extraction cycle starts and lasts for 5 minutes (peg
nos. 29-48 removed from rib H).
Ending the program
The washing process is completed by removing
peg no. 51 from rib M (stop with signal). The stop
is indicated by a buzzer and the yellow indicator
light in the RESTART button coming on.
A. Detergent, (1)
B. Not used (heating)
C. Detergent, (2)
D. Not used (heating)
E. Extern supply
F. Extern supply
G. Extern supply
H. Extraction
I. Fabric softener, (3)
K. Drain
L. High speed extr.
M. Stop with buzzer
N. High level
O. Cold water
P. Cool down
Q. Hot water
Stop with
signal
Extraction
Tumbling
Filling with
water
and fabric
conditioner
Rinsing
Draining
Fig.
44