Operating instructions

18
34
Mechanical and electrical design
1767
Drain switch (10)
For manual operation of the drain valve.
Hot water switch (11) and cold water switch (12)
are for manual operation of the inlet valves as marked. When the machine
operates automatically via the programmer, the push-buttons may be used to
raise the water level, by adding water.
Detergent flushing switch (13)
is for manual flushing of detergent from Compartment 1.
Thermostats (14), if heated
Two thermostats controlling two temperatures.
Buzzer and signal light
The buzzer and the yellow signal light (8) are controlled by rib M and may be
programmed to call the attention of the attendant to the machine, at any time
during the cycle to add supplies or unload. To re-start the machine after adding
supplies, press the re-start button.
Fig.
34