Service manual

3
41
41. Coin-meter
Service
Manual
1
5718
1
2
3
54
Price programming
Setting wash price
•Pull out the coin box.
• From inside of the coin meter casette the different settings can be
reached.
Fig.
3
6
7
1. is the switch S1 for setting the ratio between coin 1 and 2 if the coin
meter has two slots. If only one coin, all switches shall be set in OFF
position.
2. is the switch S2 for setting the price.
3. is the switch S3 for price reduction.
4. is coin one, input for coin sensor one.
5. is coin two, input for coin sensor two.
6. Yellow LED flashes with frequency 3 Hz, the value left to insert and
indicates accepted coin, lit 1 second.
7. Green LED flashes, relation coin 1 and coin 2. Continously lit when start
relay is activated.