Operating instructions

48
Trouble shooting
Trouble shooting
If machine does not start
Check to ensure that:
• it is turned on at the mains.
• the manual shut-off valves are open.
• a program has been selected.
• the drum door is locked
• the glass cartridge fuse is not blown.
If water does not drain
A Check drain valve for proper operation.
B Disconnect drain hose connected to drain line.
If full flow of water comes out, the problem is
in the main waste line. If water flow is slow,
the problem is the accumulation of foreign
materials between the drain valve and shell
outlet of machine. Clean valve body of any
foreign objects found.
If machine does not extract
A Check extract relay and relay coil for proper
operation.
B Check level control tube for clogging
If motor does not operate at wash speed
A Check wash relays.
B Check motor and V-belt.
C Check normally-closed contact of extract
relay.
D Review procedures outlined under section ”If
machine does not start” above.
70
0907
0918
71
72
0918
0050
A
B
A
A
B
C
Fig.
70
Fig.
71
Fig.
72