Operating instructions

Introduction

The EX 7 and EX 10 Emerald models washer/extractor with high spin

speeds, have been developed to meet the needs of state-of-the-art profes-

sional laundromats, institutions, hospitals etc., where high quality auto-

matic washing and quick formula variation are required.

Emerald models are unique because you can program different prices for

the seven wash cycles, giving the customer a real choice and allowing you

to maximize revenue by changing what each cycle is worth. In addition, you

can charge a higher price if the customer selects the Extra Extract option.

Using an external clock and wiring harness, these models may be pro-

grammed to lower the price by any percentage between any hours of any

days, for the ultimate in pricing flexibility!

The machines are free-standing, i.e. the drum is free to move relative to the

frame of the machine, being suspended from it by springs. This results in a

considerable reduction in vibration transferred to the frame of the machine,

which in turn simplifies installation: no special foundation is required.

The seven cycles offer different water temperatures, wash times, extraction

times, and normal or gentle drum rotation. EMERALD SERIES washers

achieve maximum environmental efficiency because only the minimum

amount of water is used for each cycle, which vary in duration.

When ordering spare parts or contacting Wascomat or your dealer for

service, always give the machine serial number, model, voltage and other

electrical characteristics appearing on the data plate at the top left of the

rear panel of the machine. The serial number is also printed on a sticker

inside the door...

KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE!

1821

Fig.