Operating instructions

General

The door, electronic timer with display, and program-selection buttons are

located at the front of the machine.

The motor and all control and indicating components, i.e. relays, level

control, etc are assembled under the top cover, easily accessible from the

top of the machine for simplified servicing.

Main units

1 Keypad with program selector - push-button switches for choice of

different wash programs.

2 Door - with automatic locking device which remains locked throughout

the different wash processes.

3 Detergent supply box - three compartments for automatic injection of

powdered detergents and fabric softener.

4 Inner cylinder - of stainless steel supported at the rear by two ballraces.

5 Outer drum - of stainless steel (18/8) supported by a four spring

suspention system. There are also four shock-absorbers to control the

movement of the drum.

6 Motor with an epicyclic gearbox - for reversing wash action, distribution

and high speed spin action.

7 Hot and cold water valves - program and level controlled solenoid valves

for filling with water, and for flushdown of automatic detergent dispenser.

8 Drain valve - timer controlled for draining the machine of water.

9 Siphon breaker - to prevent water in the machine from re-entering the

water supply system.

10 Electronic timer with quick-disconnect connectors.

Mechanical and electrical design

0918

Fig.