Operating instructions

Drain connection
Connect a 50 mm (2") flexible hose to the
machine’s drain outlet. Avoid sharp bends which
may prevent proper draining.
The drainage pipe should be located over a floor
drain, drainage channel or similar so that the
distance between the outlet and the drain is at
least 25 mm (1"). Refer to local regulations on
watersupply and drainage.
Electrical installation
Electrical installation must be carried out
by an authorized electrician, and must
follow national and local regulations.
Make sure that the ground wire is
correctly connected.
Each machine must be connected through its
own circuit breaker.
The cable must hang in a gentle arc.
Installation
0057
8
1599
10
11
Fig.
10
Fig.
11
Machines connected for 1 AC
2189
12
Fig.
12