Operating instructions

47
If water continues to flow without filling machine
A Check seating of drain valve.
If programmer does not advance
A Check synchronous motor on programmer.
B Check water level control and the rubber tube leading to same.
C Check for leak in drain valve which would prevent machine from
reaching its pre-set water level in order to energize the programmer.
If machine does not reverse
A Check reversing mechanism.
B Check auxiliary contact on extract relay.
If drum vibrates excessively
A Check wash load. Do not underload the machine.
B Check the adjustment of out of balance switch.
C Check shock absorbers.
D Check springs.
If safety fuse blows at the beginning of the cycle
A Replace fuse.
B Disconnect wires leading to the delay circuit of the door lock. Replace
fuse and start. If the machine now works, replace delay circuit.
Trouble shooting