Operating instructions

0655

Introduction

The EX model washer/extractor has been developed to cover the heavy duty

requirements of hotels, motels, nursing homes, hospitals, professional

laundries, restaurants, airlines, steamships, schools, colleges and all on-

premises laundries where flexibility and quick formula variation, coupled with

high quality automatic washing, are required.

The washer extractor is controlled by a programmable card which allow

complete programming of temperatures, water levels, wash periods etc.

The machines are free-swinging, i.e., the drum is moveable and spring

suspended in relation to the frame. This minimizes vibrations transferred to the

frame, thus simplifying installation, as no concrete base is required.

The high speed spin gives a G factor of approximately 300, providing very

efficient water removal during the spin.

All parts of the machine which come into contact with the items being washed

are made of heavy gauge surgical stainless steel, ensuring long life and lasting

beauty, as well as full protection for no-iron fabrics. All electrical components

are made accessible for servicing by simply removing the top panel.

This manual contains a technical description of the machine and instructions for

its installation, operation and maintenance. Together with the wiring diagram

which accompanies each individual machine it should be kept in a safe place

for easy reference.

When ordering spare parts or contacting Wascomat for any purpose always

give the machine serial number, model, voltage and other electrical

characteristics appearing on the nameplate at the rear of the machine.

Fig.

Introduction