Operating instructions

43
Manual washing
Drum rotation
To produce drum rotation during manual
washing, an unprogrammed card must be
inserted in the program controls and the
programmer knob turned to I (START).
Water filling with detergent and drain
Fill with water by pressing COLD WATER and/
or HOT WATER.
Use FLUSHING DOWN DETERGENT to flush
down the detergent from compartment 1
(prewash).
Water is drained from the machine with DRAIN.
Heating and extraction
A card must be programmed to provide these
functions. Refer to the section on card
programming.
Caution
For extraction, the ''drain'' phase must be
programmed for at least 30 seconds (one
program step) before extraction takes place.
In addition, ''drain'' must be programmed
during the entire extracting time (and for 30
seconds after wards for final extraction).
Procedure for use
69
70
0661
0666
Fig.
69
Fig.
70