Operating instructions

42
Programmed stop
If ''Stop with signal'' has been programmed, the
machine will stop, a buzzer will sound and a
yellow light on the RESTART button will come
on.
The machine is started again by pressing the
RESTART, push-button.
After use
Turn the dial on the programmer control panel to
O (STOP) and switch off the machine with the
I-O (ON/OFF) switch.
CAUTION
The door is locked while the wash program
is in operation and cannot be opened until
2-3 min. after completion of the program.
Open the door and remove the wash goods.
Clean the detergent compartments and the door
seal as necessary. Wipe down the machine with
a damp cloth.
Leave the door open if the machine is not going
to be used.
Leave the machine in the condition in which you
would wish to find it.
Procedure for use
66
67
68
0663
0664
0665
Fig.
66
Fig.
67
Fig.
68